Precautions for vanillyl butyl ether

- Jan 20, 2021-

Vanillyl Butyl Ether ,CAS No. 82654-98-6, chemical formula C12H18O3, molecular weight is 210.270000, light yellow liquid, boiling point is 307.9C at 760 mmHg, flash point is 140C, density 1.048 g/cm3, refractive index 1.516.

Precautions for vanillyl butyl ether

If you inhale vanillyl butyl ether, please move the patient to fresh air; if skin contact, remove contaminated clothing, wash the skin thoroughly with soap and water, and seek medical attention if you feel unwell; If the eyes are in contact with it, you should separate the eyelids, rinse with running water or normal saline, and seek medical attention immediately; if ingested, rinse your mouth immediately, prohibit vomiting, and seek medical attention immediately. The advice to protect the rescuer is as follows: Move the patient to a safe place, consult a doctor, and if possible, please show this chemical safety technical manual to the doctor on site.

If there is a small amount of leakage, collect the leaked liquid in a sealable container as much as possible, absorb it with sand, activated carbon or other inert materials, and move it to a safe place. Do not flush into the sewer; if there is a large amount of leakage, construct a dike or dig a pit Contain, seal the drainage pipeline, cover it with foam to suppress evaporation, use an explosion-proof pump to transfer to a tank truck or a special collector, recycle or transport to a waste disposal site for disposal.


For Further Information, please contact: information@sxrebecca.com